Maxwell Urethane Roofing, Inc. delivers industry-leading spray polyurethane foam (SPF) roofing and insulation systems engineered for Southwest Florida properties. Personally supervised on-site by co-owners Dan and Jeff, certified SPFA Master Applicators with over 46 years of trade experience, our monolithic foam systems eliminate leaks, provide superior wind uplift resistance, and dramatically cut cooling costs.
Spray Foam Insulation in Fort Myers, FL is a specialized roofing and insulation method where liquid polyurethane chemicals are sprayed onto a roof substrate, instantly expanding into a rigid, monolithic closed-cell foam layer. This seamless barrier provides an exceptionally high R-value thermal shield, eliminates thermal bridging, and creates a 100% waterproof seal that reinforces building envelopes against hurricane-force winds.
Southwest Florida structures face relentless solar heat gain and tropical storm pressures. Traditional fiberglass batts and mechanically fastened roof boards leave gaps that allow air infiltration, moisture intrusion, and severe thermal transfer. Partnering with a dedicated spray foam insulation contractor in Fort Myers ensures your building envelope is sealed with high-density, closed-cell polyurethane foam that stops air leakage entirely.
Our certified applicators install exterior SPF roofing systems coated with protective silicone, as well as specialized interior applications such as attic rafter encapsulation and cold storage insulation in Fort Myers, FL. Spray foam expands to 30 times its liquid volume, sealing every irregular joint, flashing, and mechanical penetration. To safeguard your property during application, our crew deploys 50 to 75+ custom vehicle covers across all nearby parked cars to eliminate windborne overspray.
Substrate & Moisture Audit: Co-owners Dan or Jeff inspect your roof deck or attic space, conducting core tests to verify substrate dryness and adhesion integrity.
Surface Cleaning & Mechanical Prep: The substrate is thoroughly cleaned of loose debris, dirt, and moisture to ensure a permanent chemical bond.
Property Protection Measures: Custom vehicle covers and containment tarps are placed over vehicles, landscaping, and equipment.
Precision Foam Application: Certified SPFA Master Applicators spray closed-cell polyurethane foam to exact depth specifications, building proper drainage slope and thermal R-value.
Protective Topcoat & Quality Verification: A high-solids silicone or elastomeric protective topcoat is applied over exterior foam to shield against UV light, followed by a final owner inspection.
Installing a seamless spray foam insulation system provides unmatched thermal insulation, hurricane resistance, and structural longevity for Fort Myers properties:
Spray foam expands into a solid, continuous layer with zero seams, joints, or mechanical fasteners, eliminating the primary causes of roof leaks.
Delivers one of the highest R-values per inch of any commercial roofing material, dramatically cutting HVAC runtime and lowering utility bills.
SPF adheres aggressively to the substrate, increasing building structural rigidity and withstanding Category 4 and 5 hurricane winds.
Liquid foam can be sprayed in varying thicknesses to eliminate flat roof low spots and prevent chronic water ponding.
Air Infiltration & Thermal Bridging: Gaps between traditional insulation sheets let hot, humid outdoor air infiltrate attic spaces. Spray foam creates an airtight thermal envelope.
Chronic Leaks Around Roof Penetrations: HVAC curbs, vents, and pipes are notorious leak spots. Spray foam expands tightly around these penetrations for a monolithic seal.
Wind Uplift & Blown-Off Roof Decks: Mechanically fastened membranes can rip off in severe tropical storm winds. Spray foam bonds directly to decking for superior wind resistance.
Temperature Loss in Commercial Refrigeration: Facilities requiring cold storage insulation in Fort Myers, FL suffer costly energy loss with traditional panels. Closed-cell foam provides a seamless vapor barrier that locks in sub-zero temperatures.
Our high-performance SPF roofing and insulation services deliver reliable protection across diverse residential and commercial facilities:
Commercial Flat & Metal Building Owners: Needing a lightweight, highly insulated roofing system that eliminates leaks and lowers cooling loads without structural tear-offs.
Cold Storage & Agricultural Facilities: Requiring airtight, moisture-impermeable insulation to maintain precise indoor temperatures across food processing and storage plants.
Single-Family Homeowners: Seeking to seal attic rafters, lower electric bills, and strengthen their roof structure against hurricane winds.
Facility Managers with Ponding Water Issues: Looking to re-pitch flat roof low spots and install a seamless waterproof envelope.
When you partner with Maxwell Urethane Roofing, Inc., you work directly with a certified spray foam insulation contractor in Fort Myers, FL. We deliver superior spray foam and silicone coating systems backed by owner accountability, maximum property protection, and over 46 years of hands-on expertise.
We never assign third-party or sub-contracted crews. Co-owners Dan and Jeff personally manage every job site to ensure exact surface preparation and application.
Certified SPFA Master Applicators bringing over 46 years of trade experience and factory-authorized warranties from top manufacturers like Gaco Western and GE.
We deploy 50 to 75+ custom vehicle covers on commercial jobs to protect client cars from overspray, ensuring clean, worry-free execution.
Fully licensed (FL Lic. #CCC057944) with $1,000,000 in liability insurance and full workers' comp on all crew members, far exceeding state standards.
Industry Experience
From your initial foam depth evaluation to the final protective topcoat application, we make protecting your Southwest Florida property straightforward, transparent, and worry-free.
We perform thorough moisture scans of your roof deck, drainage, and substrate conditions to provide an honest, transparent estimate with zero high-pressure sales.
Our hands-on crew meticulously cleans and preps the surface while deploying custom vehicle covers and containment tarps to safeguard your surrounding property.
Certified SPFA Master Applicators spray seamless polyurethane foam and high-solids silicone topcoats under direct owner supervision for maximum storm protection.
Read real Google reviews from Southwest Florida property managers, business owners, and homeowners who trust Maxwell Urethane Roofing.
Maxwell Urethane Roofing provides expert commercial spray foam insulation, protective silicone coatings, and specialized roof repairs across Fort Myers and Southwest Florida.
Spray Foam & Roof Restoration
Commercial & Residential Roofing
Silicone Coatings & Leak Repair
Comparing a monolithic spray polyurethane foam roof system against a conventional single-ply membrane helps property owners evaluate long-term energy savings and storm durability:
| System Factor | Spray Polyurethane Foam (SPF) System | Traditional Single-Ply Membrane (TPO/EPDM) |
|---|---|---|
| Seams & Fasteners | 100% monolithic; zero seams, mechanical screws, or joint penetrations. | Relies on thousands of glued or heat-welded seams that can separate over time. |
| Insulation & R-Value | Delivers exceptional continuous R-6.5+ per inch with zero thermal bridging. | Requires separate board insulation with seams that allow thermal air leakage. |
| Wind Uplift Resistance | Adheres fully to roof deck; industry-proven to withstand Category 4 and 5 hurricane winds. | Mechanically fastened or ballasted edges can peel up and blow off in severe storms. |
| Slope Customization | Can be tapered during spraying to eliminate low spots and drain ponding water. | Conforms flatly to existing deck; cannot fix localized low spots without costly tapered boards. |
| Renewability & Maintenance | Renewable indefinitely; simply apply a fresh topcoat layer every 10 to 15 years. | Requires complete tear-off and replacement once membrane embrittles (15–20 years). |
Got questions about installing spray foam insulation or closed-cell insulation in Fort Myers? Here are clear, honest answers directly from our SPFA Master Applicators:
An SPF roof system can last 20 to 30 years or more with minimal routine maintenance. By simply renewing the protective silicone topcoat every 10 to 15 years, the underlying foam layer remains fully protected, allowing the roof system to last indefinitely without a tear-off.
Yes. Spray foam forms a continuous monolithic bond with the roof deck, eliminating open edges where wind can get underneath. SPF systems consistently achieve top wind-uplift ratings and frequently survive Category 4 and 5 hurricane winds without failure.
Property protection is a top priority on every job. We deploy 50 to 75+ custom vehicle covers across all cars parked near the job site before spraying begins to ensure zero overspray contact.
Yes. Closed-cell polyurethane foam acts as both a high-R-value thermal barrier and a seamless vapor retarder, making it the premier choice for commercial cold storage, food preservation plants, and metal agricultural structures.
